Samson Resolv RXA10S Owner'S Manual Download Page 4

4

1. 

Read these instructions.

2. 

Keep these instructions.

3. 

Heed all warnings.

4. 

Follow all instructions.

5. 

Do not use this apparatus near water.

6. 

Clean only with dry cloth.

7. 

Do not block any ventilation openings. Install 
in accordance with the manufacturer’s 
instructions.

8. 

Do not install near any heat sources such 
as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce 
heat.

9. 

Do not defeat the safety purpose of the 
polarized or grounding type plug. A polarized 
plug has two blades with one wider than the 
other. A grounding type plug has two blades 
and a third grounding prong. The wide blade or 
the third prong are provided for your safety. If 
the provided plug does not fit into your outlet, 
consult an electrician for replacement of the 
obsolete outlet.

10.  Protect the power cord from being walked on or 

pinched particularly at the plugs, convenience 
receptacles, and at the point where they exit 
from the apparatus.

11.  Only use attachments/accessories specified by 

the manufacturer.

12.  Use only with the cart, stand, 

tripod, bracket, or table specified 
by the manufacturer, or sold with 
the apparatus. When a cart is 
used, use caution when moving 
the cart/apparatus combination to avoid injury 
from tip-over.

13.  Unplug the apparatus during lightening, sort or 

when unused for long periods of time.

14.  Refer all servicing to qualified personnel. 

Service is required when the apparatus has 
been damaged in any way, such as power 
supply cord or plug is damaged, liquid has 
been spilled or objects have fallen into 
the apparatus has been exposed to rain or 
moisture, does not operate normally, or has 
been dropped.

15.  This appliance shall not be exposed to dripping 

or splashing water and that no object filled with 
liquid such as vases shall be placed on the 
apparatus.

16.  Caution-to prevent electrical shock, match wide 

blade plug wide slot fully insert.

17.  Please keep a good ventilation environment 

around the entire unit.

18.  POWER ON/OFF SWITCH: For products with 

a power switch, the power switch DOES NOT 
break the connection from the mains.

19.  MAINS DISCONNECT: The plug should remain 

readily operable. For rack-mount or installation 
where plug is not accessible, an all-pole 
mains switch with a contact separation of at 
least 3mm in each pole shall be incorporated 
into the electrical installation of the rack or 
building.

20. 

 This equipment is a Class II or double 

insulated electrical appliance. It has been 
designed in such a way that it does not require 
a safety connection to electrical earth (for 
wireless subwoofer unit).

21.  Danger of explosion if battery is incorrectly 

replaced. Replace only with the same or 
equivalent type.

22.  Do not ingest the battery, Chemical Burn 

Hazard.

23.  (The remote control supplied with) This product 

contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause 
severe internal burns in just 2 hours and can 
lead to death.

24.  Keep new and used batteries away from 

children.

25.  If the battery compartment does not close 

securely, stop using the product and keep it 
away from children.

26.  If you think batteries might have been 

swallowed or placed inside any part of the 
body, seek immediate medical attention.

27.  The battery (battery or batteries or battery 

pack) shall not be exposed to excessive heat 
such as sunshine, fire or the like.

28.  Do not handle leaking or damaged Lithium 

batteries.

29.  Risk of leakage. Only use the specified type of 

Batteries. Never mix new and used batteries. 
Observe correct polarity. Remove batteries 
from products that are not in use for extended 
periods of time. Store batteries in a dry place.

30.  Do not recharge non-rechargeable batteries.
31.  Avoid exposure to extreme heat or cold.
32.  THIS PRODUCT CONTAINS A LITHIUM COIN 

CELL BATTERY. IF MISUSED OR ABUSED 
THIS CAN RESULT IN:  

- Smoke or gas hazard 
- Heat hazard 
- Fire hazard 
- Explosion hazard

Important Safety Information

Summary of Contents for Resolv RXA10S





















































Reviews: