Samson Meteor Mic, Owner'S Manual

Page: 15 / 24

Meteor Mic · USB Studio Condenser Microphone
11
5. Launch your DAW, turn the microphone’s
Volume knob down, and select the Meteor Mic
for the input and output .
6. Set up a mono record track in your DAW for
the vocal track .
7. Next, set the level of the Meteor Mic . There
are few ways to do this depending on your
preference and computer setup . One way to
control the gain is to set the microphone’s in-
put level in the Sound playback in Windows, or
in the Sound dialog box in System Preferences,
if you are using a MAC OS . You may also set the
gain of the microphone by raising the Input
level control in your DAW . If you see the Power/
Peak LED illuminate red, your signal will be distorted . Turn the MIC level control down until it
does not flash red .
8. Speak or sing into the mic and raise the Meteor Mic’s Volume knob until you reach a com-
fortable listening level .
Quick Start