Samson MDR10, Owner'S Manual

Page: 5 / 28

3
MDR10 Features
The Samson MDR10, ten channel mixer with onboard 24 BIT DSP is a comprehensive, all-in-one solution for live
sound, recording, fixed installation and post production applications. Here are some of its main features:
• Ten channels – Six Mic/Line plus two Stereo/Dual inputs with mic pre’s for a total of 10 microphone
inputs.
• Flexible design topology ideal for live sound, recording and post production.
• On-board 24 BIT DSP (Digital Signal Processor) multi-effects processor with eight great sounding pre-
sets including REVERB, DELAY AND CHORUS.
• Flexible signal routing via the main L and R Mix, 3 / 4 bus outputs, as well as the Mono output.
• 60 mm audio taper faders on all channels and the master 3 / 4 and Mix outputs.
• 2 TK LEVEL control allows you to mix in a CD, DAT, Cassette, Computer Sound Card or Mini Disk.
• The mono inputs feature a three-band channel equalizer with 15dB of cut or boost at 80Hz, variable mid-
range from 100 Hz to 5 KHz with 15dB of cut or boost and 15dB of cut or boost at 12KHz, plus a Low Cut
filter at 80Hz providing precise and musical results in sound shaping.
• Two Auxiliary Sends, with Pre-Post switching on Aux 1, can be used to route signals to external effects,
or to create a separate mix for on-stage monitors, or studio headphones.
• Twelve-segment LED Meter with VU ballistics displays the main MIX output, plus SOLO, PFL, Phantom
and Power LED indicators.
• High quality, low noise, discrete microphone pre-amplifiers with 48-Volt phantom power, provide
Maximum Dynamic Range and transparent audio.
• Advanced circuit design using discrete components and high quality, low noise op-amps carefully select-
ed at each stage of the signal path.
• Quality built and rugged construction ensure reliable performance from venue to venue and session to
session.
• Three-year extended warranty.