Samson 6134, Mounting And Operating Instructions, Page: 25 / 58

EB 6134 EN 6-1
Operation
6 Operation
The converter is ready for use after it has
been mounted and the pneumatic and elec-
tric connections have been established (see
the 'Installation' section).
The converter is tested by SAMSON and the
output signal is adjusted to the required
range. In case of inconsistencies caused by
the converter despite it being mounted cor-
rectly, the zero and span can be retuned
(see the 'Servicing' section).
Loss of Ex d protection due to opening the
enclosure cover or damage to the thread.
Î
Keep the enclosure cover firmly closed
during operation.
Î
Put the device out of operation when its
cover thread or connecting thread is
damaged. Replace it with a new device.
Note
!
DANGER !