background image

Note on these mounting and operating instructions

These mounting and operating instructions assist you in mounting and operating the device 
safely. The instructions are binding for handling SAMSON devices. The images shown in 
these instructions are for illustration purposes only. The actual product may vary.

 

Î

For the safe and proper use of these instructions, read them carefully and keep them for 
later reference.

 

Î

If you have any questions about these instructions, contact SAMSON‘s After-sales Service 
([email protected]).

The mounting and operating instructions for the devices are included 
in the scope of delivery. The latest documentation is available on our 
website at 

www.samsongroup.com > Service & Support > Downloads > 

Documentation

.

 Definition of signal words 

Hazardous situations which, if not avoided, 
will result in death or serious injury

Hazardous situations which, if not avoided, 
could result in death or serious injury

Property damage message or malfunction

Additional information

Recommended action

DANGER

!

WARNING

!

NOTICE

!

Note

Tip

 

EB 6116 EN

Summary of Contents for 611

































































Reviews: