Samson 4749, Mounting And Operating Instructions

Page: 9 / 92

EB 4749 EN 1-5
Safety instructions and measures
1.3 Notes on possible property damage
NOTICE !
Risk of malfunction due to incorrect mounting parts/accessories or incorrect assignment
of lever and pin position.
Î
Only use mounting parts/accessories listed in these mounting and operating instruc -
tions to mount the position transmitter.
Î
Observe the type of attachment.
Î
Observe the assignment between lever and pin position.
Risk of malfunction due to calibration not being performed.
The zero and span calibration allow the position transmitter to be adapted to the mounting
situation. The position transmitter is only ready for operation after the zero and span have
been calibrated.
Î
Perform calibration before initial start-up.
Î
Calibrate the position transmitter after changing the mounting position.
Risk of position transmitter damage due to incorrect grounding of the electric welding
equipment.
Î
Do not ground electric welding equipment near to the position transmitter.