Samson 4749, Mounting And Operating Instructions

Page: 46 / 92

7-2 EB 4749 EN
Start-up
7.1 Determining the mounting situation
The position transmitter can be mounted on linear or rotary actuators. The actuator mounting
is determined in menu item 2.
1. Press

key twice to select menu item 2.
The green LED blinks according to the following pattern:
… …
2. Press

key to activate the selection level.
The red LED blinks according to the following pattern:
… … (mounting on a linear actuator)
Î
Press

key again. The red LED blinks according to the following pattern:
… … (mounting on a rotary actuator)
Î
Press

key to switch between the two options.
3. Press

key to save the required setting.
The position transmitter returns to menu item 2.
The green LED blinks according to the following pattern:
… …
4. Press

key five times to return to the normal state.
The green LED is constantly illuminated when the procedure is completed.
7.2 Determining the position at 4 mA
The first position is assigned to the 4 mA signal.
1. Press

key three times to select menu item 3.
The green LED blinks according to the following pattern:
… …