EB 3131 EN
23
Measures for preparation
Storage instructions
−
Protect the device against external influ
-
ences (e.g. impact).
−
Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
−
Protect the device against moisture and
dirt. Store it at a relative humidity of less
than 75 %. In damp spaces, prevent con
-
densation. If necessary, use a drying
agent or heating.
−
Make sure that the ambient air is free of
acids or other corrosive media.
−
Observe the permissible ambient tem-
peratures (see section 3.3).
−
Do not place any objects on the device.
Special storage instructions for elastomers
Elastomer, e.g. diaphragm
−
To keep elastomers in shape and to pre-
vent cracking, do not bend them or hang
them up.
−
We recommend a storage temperature of
15 °C for elastomers.
−
Store elastomers away from lubricants,
chemicals, solutions and fuels.
SAMSON's After-sales Service can provide
more detailed storage instructions on re-
quest.
4.4
Preparation for installation
Proceed as follows:
Î
Flush the pipelines.
The plant operator is responsible for clean-
ing the pipelines in the plant.
Î
Check the regulator to make sure that it
is clean.
Î
Check the regulator for damage.
Î
Check to make sure that the type
designation, valve size, material,
pressure rating and temperature range of
the regulator match the plant conditions
(size and pressure rating of the pipeline,
medium temperature etc.).
Î
Check any mounted pressure gauges to
make sure they function.
Tip
Note
