manualshive.com logo in svg

Samson 43-1, Mounting And Operating Instructions

Share
Download
Samson 43-1 Mounting And Operating Instructions Download Page 24

24  

EB 2171 EN

Measures for preparation

4.3  Storage

Risk of regulator damage due to improper 
storage.

 

−

Observe the storage instructions.

 

−

Avoid long storage times.

 

−

Contact SAMSON in case of different stor

-

age conditions or long storage periods.

We recommend regularly checking the de-
vice and the prevailing storage conditions 
during long storage periods.

Storage instructions

 

–

Protect the device against external influ-
ences (e.g. impact).

 

–

Do not damage the corrosion protection 
(paint, surface coatings). Repair any 
damage immediately.

 

–

Protect the device against moisture and 
dirt. Store it at a relative humidity of less 
than 75 %. In damp spaces, prevent con-
densation. If necessary, use a drying 
agent or heating.

 

–

Make sure that the ambient air is free of 
acids or other corrosive media.

 

–

Observe the permissible ambient tem-
peratures (see section Table 1).

 

–

Do not place any objects on the device.

NOTICE

!

Note

SAMSON's After-sales Service can provide 
more detailed storage instructions on re-
quest.

Note

Summary of Contents for 43-1













































Reviews:

No comments

Brands by name

Popular brands

Load more brands