background image

EB 3930 EN 

 17

Disposal

8  Disposal

SAMSON is a producer 

registered at the following 

European institution 

u

 

https://

www.ewrn.org/national-

registers/national-registers. 

WEEE reg. no.: 

DE 62194439/FR 025665

 

Î

Observe local, national and international refuse regulations.

 

Î

Do not dispose of components, lubricants and hazardous substances together with your 
other household waste.

We can provide you with a recycling passport according to PAS 1049 on request. Simply 

e-mail us at [email protected] giving details of your company address.

On request, we can appoint a service provider to dismantle and recycle the product.

9  Accessories

Designation

Order number

Blanking plug G ¼, stainless steel 1.4571 (for threaded connections)

0070-0856

O-ring 14x1.5 made of nitrile butadiene rubber (for blanking plug)

8421-0070

Silencer made of polyethylene, G ¼ connection, degree of protection IP 54

8504-0066

Cable socket according to DIN EN 175301-803, made of black polyamide, type 

B, 3-pole, with Pg 9 cable gland and gasket of nitrile butadiene rubber

0790-6054

Adapter plate with NAMUR interface ¼“ on NAMUR rib (G ¼)

1400-6751

Adapter plate with NAMUR interface ¼“ for SAMSON Types 3353 and 3354 

Valves

1409-3001

Adapter plate with NAMUR interface ¼“ for SAMSON Type 3351 On/off Valve

1400-9638

Note

Tip

Summary of Contents for 3930





















Reviews: