background image

 

2  

EB 8823 EN

Note on these mounting and operating instructions

These mounting and operating instructions assist you in mounting and operating the device 
safely. The instructions are binding for handling SAMSON devices.

 

Î

For the safe and proper use of these instructions, read them carefully and keep them for 
future reference.

 

Î

If you have any questions about these instructions, contact SAMSON‘s After-sales Service 
Department ([email protected]).

 Definition of signal words 

Hazardous situations which, if not avoided, 
will result in death or serious injury

Hazardous situations which, if not avoided, 
could result in death or serious injury

Property damage or malfunction

Additional information

Recommended action

DANGER

!

WARNING

!

NOTICE

!

Note

Tip

Referenced documentation

The following documents apply in addition to these mounting and operating instructions:

 

Mounting and operating instructions for mounted actuator, e.g. 

u

 

EB

 8820

 for 

Type

 3571

 

Pneumatic A

ctuator

 

Mounting and operating instructions for mounted valve accessories (e.g. solenoid valve)

The mounting and operating instructions for all supplied devices are included in the delivery. 
The latest versions of the documents are available on our website at 

u

 

www.samsoncontrols.com.

Summary of Contents for 3525

























































Reviews: