Samson 3375, Mounting And Operating Instructions, Page: 121 / 130

EB 8332-2 EN 16-31
Annex A (configuration instructions)
CL Designation COILS (1-bit) Access Status 0 Status 1
EEPROM error
25 Basic setting: state R No Yes
26 Basic setting: cause R Read error Write error
27 Settings: state R No Yes
28 Settings: cause R Read error Write error
29 Calibration: state R No Yes
30 Calibration: cause R Read error Write error
31 Potentiometer calibration: state R No Yes
32 Potentiometer calibration: cause R Read error Write error
33 Serial number: state R No Yes
34 Serial number: cause R Read error Write error
35 Manufacturing parameter: state R No Yes
36 Manufacturing parameter: cause R Read error Write error
37 Transit time: state R No Yes
38 Transit time: cause R Read error Write error
39 Status messages: state R No Yes
40 Status messages: cause R Read error Write error
41 Statistics: state R No Yes
42 Statistics: cause R Read error Write error
Functions
43 Zero calibration active R No Yes
44 Initialization active R No Yes
45 Blocking protection active R No Yes
46 Blockage removal active R No Yes
States
48
Active controller
(only application: temperature closed-loop control upon
input signal failure)
R No Yes
49 Excessive temperature inside the actuator R No Yes
50 Priority position active R No Yes
51 No initialization performed R No Yes