Samson 3375 Mounting And Operating Instructions Download Page 24

Page: 24 / 130

4-2

EB 8332-2 EN

Shipment and on-site transport

4.5 Storing the actuator

Risk of electric actuator damage due to

improper storage.

Observe the storage instructions.

Avoid long storage times.

Contact SAMSON in case of different
storage conditions or longer storage
times.

We recommend regularly checking the elec

tric actuator and the prevailing storage con

ditions during long storage periods.

Storage instructions

−

Protect the electric actuator against exter-

nal influences (e.g. impact).

−

Protect the electric actuator against mois-
ture and dirt.

−

Make sure that the ambient air is free of
acids or other corrosive media.

−

Observe the permissible storage tem-

perature from –20 to +70 °C.

−

Do not place any objects on the electric
actuator.

NOTICE

Note

Summary of Contents for 3375



































































































































Search results

Summary of Contents for 3375

Reviews:

Related manuals for 3375

Brands by name

Popular brands

Samson 3375, Mounting And Operating Instructions

Search results

Summary of Contents for 3375

Reviews:

Related manuals for 3375

Brands by name

Popular brands