22
EB 5866 EN
Preparation
4 Preparation
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Compare
the shipment received against the deliv-
ery note.
2. Check the shipment for transportation
damage. Report any damage to SAM-
SON and the forwarding agent (refer to
delivery note).
4.1 Unpacking
Do not remove the packaging until immedi-
ately before installing the valve into the pipe-
line.
Proceed as follows to lift and install the
valve:
1. Remove the packaging from the valve.
2. Dispose of the packaging in accordance
with the valid regulations.
4.2 Transporting and lifting
SAMSON's After-sales Service department
can provide more detailed transport and lift-
ing instructions on request.
4.2.1 Transporting
−
Protect the control valve against external
influences (e.g. impact).
−
Protect the control valve against moisture
and dirt.
−
Observe the permissible transportation
temperature of –20 to +65 °C.
4.2.2 Lifting
Due to the low service weight, lifting equip-
ment is not required to lift the valve (e.g. to
install it into the pipeline).
4.3 Storage
Risk of valve damage due to improper stor-
age.
−
Observe storage instructions.
−
Avoid long storage times.
−
Contact SAMSON in case of different stor-
age conditions or long storage periods.
We recommend regularly checking the con-
trol valve and the prevailing storage condi-
tions during long storage times.
Storage instructions
−
The control valves can be stored horizon-
tally.
−
Protect the control valve against external
influences (e.g. impact).
Note
Tip
NOTICE
!
Note
Summary of Contents for 3222/5857 series
Page 39: ...EB 5866 EN 39...
