Samson 2413 Series, Mounting And Operating Instructions

Page: 25 / 52

EB 2517 EN 25
Measures for preparation before installation
Fig. 5: Schematic drawing of lifting points on
the regulator
4.2.3 Storage
Risk of regulator damage due to improper
storage.
−
Observe storage instructions.
−
Avoid long storage times.
−
Contact SAMSON in case of different stor-
age conditions or long storage periods.
NOTICE !
We recommend regularly checking the regu-
lator and the prevailing storage conditions
during long storage periods.
Storage instructions
–
Protect the regulator against external in -
fluences (e.g. impact).
– Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
–
Protect the regulator against moisture
and dirt. Store it at a relative humidity of
less than 75 %. In damp spaces, prevent
condensation. If necessary, use a drying
agent or heating.
– Make sure that the ambient air is free of
acids or other corrosive media.
–
The permissible storage temperature of
standard regulators is –20 to +65 °C (–4
to +149 °F).
– Do not place any objects on the
regulator.
Note