Samson 2413 Series, Mounting And Operating Instructions

Page: 19 / 52

EB 2517 EN 19
Design and principle of operation
Table 4: Materials · Material numbers according to DIN EN
Valve Type 2417
Nominal pressure PN 16 PN 25 PN 40
Max. perm.
temperature
300 °C 350 °C
Body
Cast iron
Spheroidal graphite
iron
Cast steel Stainless steel
EN-GJL-250 EN-GJS-400-18-LT 1.0619 1.4408
Seat CrNi steel CrNiMo steel
Plug
Material CrNi steel CrNiMo steel
Seal PTFE with 15 % glass fiber · EPDM · NBR · FKM
Guide bushing CrNi steel
Balancing bellows and
bellows seal
Stainless steel 1.4571
Actuator Type 2413
Diaphragm actuator Bellows actuator
Diaphragm cases Sheet steel S 235 JR (St 37-2) 1) –
Diaphragm
EPDM · FKM· NBR · EPDM with PTFE
protective facing
–
Bellows housing – 1.5415/1.4301 (stainless steel only)
Bellows – 1.4571
1)
In corrosion-resistant version (CrNi steel)
Table 5: Dimensions in mm and weights in kg
Excess pressure valve Type 41-73
Valve size DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100
Length L 130 150 160 180 200 230 290 310 350
Height H1 335 390 510 525
Height H2
Forged steel 53 – 70 – 92 98 – 128 –
Other materials 44 72 98 118
1)
+10 % for all other materials
2)
Actuator with two diaphragms: 1 to 2.5 bar
3)
Actuator with two diaphragms: Height H + 50 mm