Samsomatic 3962 Series, Mounting And Operating Instructions

Page: 8 / 16

Pneumatic connections
Make sure the seals on the booster valve
and the CNOMO interface are not dam-
aged.
Fig. 9 · CNOMO- interface and booster valve
Internal auxiliary air routing:
Make sure the marked hole is not closed by
the black reversible seal (Fig. 10, left).
External auxiliary air routing:
Make sure the marked hole is covered by
the black reversible seal (Fig. 10, right).
Fig. 10 · CNOMO interface; position of reversible seal
for internal (left) and external (right) routing of
the auxiliary air
Carefully place the CNOMO interface onto
the booster valve. Make sure all seals are
properly positioned on the booster valve. If
one seal is missing, replace the entire
Type 3962 Solenoid Valve.
Mounting direction:
Make sure connection 9 of the CNOMO in-
terface (external auxiliary air routing) is loc-
ated on the same side of the booster valve
as connection 1 (supply air) or connection 3
(vent).
Fasten the CNOMO interface using the two
hexagon socket head screws (Fig. 8).
Carefully place the red solenoid valve head
onto the CNOMO interface. Make sure the
two holes in the head are positioned exactly
on the seals of the CNOMO interface. If one
seal is missing, replace the entire Type 3962
Solenoid Valve. Observe the mounting dir-
ection.
Fasten the red solenoid valve head using the
two hexagon socket head screws (Fig. 7).
8
EB 3962-1 EN