HDS
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
8
Switchers
1
2
3
CD
POWER
GREEN - indication of the presence of HD signal at selected input
RED - indication of a power supply presence
RED - indication of the presence of SD signal at selected input
GREEN BLINK - reference is OFF
RED BLINK - reference is OFF
RED/GREEN BLINK - input is OFF
4
FUSE: 500mA
AC ~230V/50Hz
POWER
REMOTE
NETWORK
TCP/IP
EXT
REF
INPUT
4
3
2
1
OUTPUT
B
A
www.sams.rs
Made in Serbia
HDS-4
CODE: 002.001
SN:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
MAC ADDRESS:
USE ONLY WITH A 250V FUSE
Remote control panel 4x1
SCU-4
www.sams.rs
1
2
3
4
HD/SD SDI switcher 4x1
HDS-4
www.sams.rs
CD
POWER
GREEN
-
HD signal present
RED
-
SD signal present
GREEN BLINK
-
no ref
RED BLINK
-
no ref
RED/GREEN BLINK
-
no signal
Connect the power cord.
The device works only on AC ~ 230 V / 50 Hz.
Connect all necessary connectors
before the unit is turned on.
Turn on the device by pressing
power switch.
Status is represented by LEDs on the front side
video inputs video output
external
reference
TCP-IP
HDS-4, rear side
connection
with
remote
control
HDS-4, front side
Buttons to select an input
Remote control - SCU-4, front side
NOTE:
Be sure to close with 75Ω terminator all inputs and outputs that are not used!
The device supports only the reference Black Burst and 3-level sync.
For SD signal use the BB reference.
For HD signal use 3-level sync reference.
If the switcher is connected to the network, changes in inputs that are made in this way remote
control does not detect.
1
1
5
5
9
9
6
6
A0
G
V-
A1
A0
A2
A3
A1
A2
A3
G
V-
female
male
2
3
4
7
8
2 3 4
7 8
Connector for Control Panel
SCU-10
(male/female) SUB D9 pin
INSTALLATION
CABLE CONNECTION BETWEEN SWITCHER AND REMOTE
