Sams AD-12 User Manual For Use And Maintenance Download Page 23

Page: 23 / 24

ADC

Sams elektronik d.o.o. • [email protected] • www.sams.rs

elektronik

Converters

Menu - Settings

Sel.Menu

Setting1

AD-12fs

After setup within the available menu options, it is temporarily recorded in the memory.

The number next to “Setting” means that the bank is loaded into memory.

When the device is set, select SETTING menu, press the “OK / SAVE” to open the options menu and

select one of four banks to record: SaveMem1, SaveMem2, SaveMem3 and SaveMem4. The device can

record 4 different settings.

After selecting a bank press “OK / SAVE”. The display will print “SAVED”.

If you want to stay in this menu, press the UP / DOWN keys, and to exit the MENU / BACK button.

In this menu, there are options: LoadMem1, LoadMem2, LoadMem3 and LoadMem4 or options to load

settings.

After selecting a bank press “OK / SAVE”. The display will print “LOADED”.

If you want to stay in this menu, press the UP / DOWN keys, and to exit the MENU / BACK button.

Option FACTORY! set default settings in the currently active bank.

Press the “OK / SAVE”. On display will print ‘RESETED. “

If you want to stay in this menu, press the UP / DOWN keys, and to exit the MENU / BACK button.

13. SETTINGS

Summary of Contents for AD-12

























Search results

Summary of Contents for AD-12

Reviews:

Related manuals for AD-12

Brands by name

Popular brands

Sams AD-12, User Manual For Use And Maintenance

Search results

Summary of Contents for AD-12

Reviews:

Related manuals for AD-12

Brands by name

Popular brands