ADC
Sams elektronik d.o.o. • [email protected] • www.sams.rs
elektronik
19
Converters
6. COLOR LEVEL
This menu is used to adjust the color level. This is achievable by scaling Cr and Cb signals controlled
by the user.
Control is allowed in a range of 0% to 200%.
The factory setting is 100%.
Select by pressing the UP / DOWN keys.
Once you have selected the option, press the “MENU / BACK” button. Option is temporarily saved.
Menu - Error mode
Sel.Menu
Err.Mode
AD-12fs
5. ERROR MODE
This menu is used to set how the product behaves during a fault in the signal.
Select an option:
- PASS ALL - device pass signal no matter how bad signal is;
- BLACK - the unit will generate a black image, due to poor incoming video signal;
- 75% COLOR BAR - the unit will generate a color bar, due to poor incoming video signal;
- KILL OUT - device will cancel the signal at the output due to poor incoming video signal;
The factory setting is PASS ALL.
Select an option by pressing the UP / DOWN keys.
Once you have selected the option, press the “MENU / BACK” button. Option is temporarily saved.
Menu - Color level
Sel.Menu
ColorLvl
AD-12fs
