USING THE MONITOR’S ADVANCED FEATURES
- 24 -
`
Press this button to select the source of display. Each time the
input button is pressed, the on screen display will appear “AV1”,
“AV2”, “AV3”, “YCBCR”, “RGB1”, “RGB2” in turn.
When the source of display is AV1 or AV2 or AV3 or Y CB CR, Press
this button to select the mode of display. Each time the WIDE
button is pressed, the on screen display will appear “4:3”, “16:9”
in turn.
This function button only to use for wide screen model serial.
1. Push ”+” button, the channel will change from 2
→
3
→
4
→
… .
(channels not put in memory will be skipped).
2. Push ”-” button, the channel will change from
1
→
125
→
124
→
… .
(channels not put in memory will be skipped).
※
¬
This function is only to be used with tuner card installed.
-
34” does not have this function on front panel. Please use
your remote control to change channels.
Pre ss these buttons to directly select the video signal source to
display
※
Press RGB button to select the source of display. Each time
the input button is pressed, the on screen display will
appear “RGB1” , “RGB2” in turn.
RS232 CONTROL ITEM
BRIGHTNESS
INITIAL VOLUME
H-POSITION
CONTRAST
INPUT SELECT
PINCUSHION
POWER ON/OFF
COLOR
PARALLELLOGRAM
RECALL
TINT
TRAPEZOID
DEGAUSS
V-SIZE
SHARPNESS
MUTE ON/OFF
V-POSITION
ROTATION
PANEL KEY LOCK
H-SIZE
SAVE
AV1
→
AV2
→
AV3
→
YCBCR
→
RGB1
→
RGB2
INPUT
WIDE
R/C ONLY
▼
CHANNEL
▲
RGB AV1 AV2 AV3
TV YC
B
C
R
