background image

USING THE MONITOR’S ADVANCED FEATURES 

- 18 - 

Y CB CR menu on screen display: 

 
 
 
 
 
 
 
 

To change monitor setting of the Master Picture Menu, you must 

choose a category, and then adjust the value of each category. 

Here’s how to select a category: 

Press the menu + or menu – button while the master picture menu 

is on screen. 

Each time the menu + button is pressed, a menu icon shows red for 

selection. Beginning with the starting position, and moving to the 

right, pressing the menu + button continuously will circulate the 

selector, eventually returning to the starting position. 

Press the menu  – button and it will select menu icon in the 

opposite direction, eventually returning to the starting position. 

 

 

After you have selected a category, you can increase or decrease 

a display setting. Here’s how to adjust a setting: 

Press the menu +/- button. While the master picture menu is on 

screen, use the menu + or menu – select key to choose a category. 

Once you have selected a category, press the ADJ + or ADJ  – 

button. Each time the ADJ + adjust button is pressed, the settings 

for the category selected will increase. Each time the ADJ – button 

is pressed, the settings for the category selected will decrease. 

      

You can adjust monitor settings for the following categories:

 

RGB menu On Screen Display 

 

 

 

 

 

 

 

 

 M: YCBCR FH :15KHz  FV :60Hz 

1 2 8  

  R ← → B  

BRIGHT 

 

M   :   0 1   F H : 3 1 K H z   F V :   6 0 H z 

1 2 8  

BRIGHT 

3

 ADJ 

4

 

 -  VOL  + 

Summary of Contents for SME-32DL5




























Reviews: