REMOTE CONTROL FUNCTIONS
-10-
11.
Use MTS to toggle between SAP, MONO, or STEREO audio mode settings
for your television program. SAP, MONO, and STEREO audio modes are
only applicable to standard television broadcasts.
12.
Use MUTE button to quickly turn off the sound through the TV’s
internal speakers. Once pushed, the on-screen display will indicate the
mute function is enabled. To disable the mute function, press the
button again. The on-screen display will disappear and sound will be
restored from the speakers.
13.
Push this button to enable/disable the blue back function. The blue back
function is used to suppress “snowflakes” and audible noise when the
television cannot receive a TV broadcast signal. This funtion is only
applicable to analog TV receptions.
14.
Use DISPLAY button to show channel information on the screen.
15.
The built-in woofer can add a significant bass boost to the sound of your
television/monitor. Press WOOFER button to switch the built-in woofer ON or
OFF . Each time the button is pressed, the on-screen display will display
“woofer on” or “woofer off”.
16.
Degaussing keeps the display free from unwanted magnetism that can
result in color impurity. Each time the monitor is turned on, it is
automatically degaussed. If the unit is displayed continuously, It is
recommended that unit is degaussed at least once every few days to
remove any color impurities. Whenever the degauss button is pushed,
the display image blurs and a humming sound is heard. This is normal.
The screen will return to normal operations in a matter of seconds. A
minimum of 20 minutes should be observed between each use of the
manual degauss button.
MTS
MUTE
BLUE BACK
ON/OFF
DISPLAY
WOOFER
DEGAUSS
