REMOTE CONTROL FUNCTIONS
-9-
6.
This button is used to add a channel to memory or erase a channel stored in
memory. With the channel that you want to add or erase selected and
displayed on the screen, press the CH ADD/ERASE button. The screen will
display “ADD” or “ERASE”. If “ADD” is displayed, it means that this channel
can be added to memory and selectable using the channel
▲▼
buttons. If
“ERASE” is displayed, it means that this channel is erasable from memory
and will not be accessible using the channel
▲▼
buttons.
7.
Digit Keypad
Use the digit keypad to select TV channels. Push any two digits on the
keypad to select channels between CH1 and CH99. For example, to select
CH2, simply push “0” and “2”. You may also select a single-digit channel
between CH2 and CH9 by simply pressing the corresponding digit key.
When a single digit is pressed, the TV will wait for 5 seconds before changing
the channel. To select channels beyond CH100, push the “100” key first
followed by the last two digits of the channel. For example, to select CH107,
push “100”, “0”, and ”7”.
8.
QV (Quick View) button allows you to instantly revert back to the previously
selected channel.
9.
Use CCD to set closed caption mode. The CCD button toggles between the
following modes:
10.
Press and hold the button to increase the volume level. Press and
hold volume - button to decrease the volume level.
The /- buttons also function as ADJ +/- buttons for the On-Screen
display functions
CH
ADD/ERASE
QV
CLOSED
CAPTION
OFF
COLSED
CAPTION
1
COLSED
CAPTION
2
TEXT1
TEXT2
CCD
＋
－
VOL
1
2
3
4
5
6
7
8
9
0
100
