sensor and there is no symbol.
2
）
Maximum value
：
Digitally display the maximum instantaneous value measured after
symbol “MAX” appeared.
3
）
Average value
：
Digitally display the average value measured after symbol “AVG”
appeared.
4
）
Maximum average value
：
Digitally display the maximum average value measured after
symbol “MAX
AVG” appeared.
4-4-3 Correction factor
（
CAL
）
Correction factor CAL is used to the correction of displayed value. First multiply the
measured internal electric field intense value by the inputted CAL value, then display or save the
result. The range of CAL is from 0.20 to 5.00.
CAL is always used to the sensitivity value of the input electric field sensor in order to
improve the measurement accuracy of frequency response.
The CAL provider by electric field sensor is used for this case. In most cases the
measurement accuracy is enough even if you ignore the frequency response CAL. At this time the
CAL should be set to 1.00.
Typical CAL of electric field
：
Frequency
CAL
100MHz
1.44
200MHz
1.56
300MHz
0.84
433MHz
1.01
500MHz
0.45
600MHz
1.12
700MHz
2.80
800MHz
1.33
900MHz
2.18
1GHz
1.07
1.2GHz
1.57
1.4GHz
1.25
1.6GHz
0.48
1.8GHz
0.72
2GHz
0.64