4.
key
：
1)
Press this key once a record will be saved in memory.
2)
When the automatically turning off is enabled press this key and hold 2 seconds it
will be disabled. When the automatically turning off is disabled press this key and
hold 2 seconds it will be enabled.
3)
In the setting alarm limit mode, press this key to increase the limitary value.
4)
In the manually reading records mode, press this key to read the previous record.
5)
In the setting CAL mode, press this key to increase the CAL value.
6)
In the clearing memory mode, press this key to confirm clearing memory or not
clearing. And press this key to quit this mode.
5. key
：
1)
Press this key to circle among “instantaneous”
→
“maximum instantaneous
value”→”average value”→ “maximum average value”.
2)
Press this key and hold for 2 seconds to turn into alarm limit setting mode.
3)
In the CAL setting mode press this key to quit and turn into measurement mode.
4)
In manual reading mode press this key to quit this mode.
5)
In the alarm limit setting mode, press this key to turn the meter from unit setting to
limit value setting. Press this key will also save the settings and quit this mode.
6. key
：
1) Press this key to circle among “mV/m or V/m”
→
“uA/m or mA/m”
→
“uW/m2 or
mW/m2”
→
“uW/cm2”.
7. key
：
1)
Press this key to circle among axis
：
”three axis”
→
”X axis”
→
”Y axis”
→
”Z
axis”.
2)
Press and hold for 2 seconds to turn into CAL setting mode.
MEM
MODE
AXES
READ