background image

Limited Warranty 

 

 

1. 

The equipment manufactured for Samlex America Inc. (the “Warrantor”) is warranted to be free from 
defects in workmanship and materials under normal use and service. 

 

2. 

This warranty is in effect for: 

a. 3 

Years 

from 

date of purchase

 by the end user . 

 

3. 

Samlex America will determine eligibility for warranty from the date of purchase shown on the warranty 
card when returned within 30 days, or 

a. 

The date of shipment by Samlex America, or 

b. 

The date of manufacture coded in the serial number, or  

c. 

From a copy of the original purchase receipt showing the date of purchase by the user. 

 

4. 

In case any part of the equipment proves to be defective, the Purchaser should do the following: 

a. 

Prepare a written statement of the nature of the defect to the best of the Purchasers knowl-
edge, and include the date of purchase, the place of purchase, and the Purchasers name, 
address and telephone number. 

b. 

Call Samlex America at 800-561-5885 or 604-525-3836 and request a return material authori-
zation number (RMA). 

c. 

Return the defective part or unit along with the statement at the Purchasers expense to the 
Warrantor; Samlex America 

 

5. 

If upon the Warrantor’s examination the defect proves to be the result of defective material or workman-
ship, the equipment will be repaired or replaced at the Warrantor’s option without charge, and returned to 
the Purchaser at the Warrantor’s expense by the most economical means. Requests for a different 
method of return or special handling will incur additional charges and are the responsibility of the Pur-
chaser. 

 

6. 

Samlex America reserves the right to void the warranty if: 

a. 

Identification marks or serial numbers are removed or altered in any way. 

b. 

Our invoice is unpaid. 

c. 

The defect is the result of misuse, neglect, improper installation, environmental conditions, 
non-authorized repair, alteration or accident. 

 

7. 

No refund of the purchase price will be granted to the Purchaser, unless the Warrantor is unable to rem-
edy the defect after having a reasonable number of opportunities to do so. 

 

8. 

Only the Warrantor shall perform warranty service. Any attempt to remedy the defect by anyone else shall 
render this warranty void. 

 

9. 

There shall be no warranty for defects or damages caused by faulty installation or hook-up, abuse or 
misuse of the equipment including exposure to excessive heat, salt or fresh water spray, or water immer-
sion except for equipment specifically stated to be waterproof. 

 

10.  No other express warranty is hereby given and there are no warranties that extend beyond those de-

scribed herein. This warranty is expressly in lieu of any other expressed or implied warranties, including 
any implied warranty of merchantability, fitness for the ordinary purposes for which such goods are used, 
or fitness for a particular purpose, or any other obligations on the part of the Warrantor or its employees 
and representatives. 

 

11.  There shall be no responsibility or liability whatsoever on the part of the Warrantor or its employees and 

representatives for injury to any person or persons, or damage to property, or loss of income or profit, or 
any other consequential or resulting damage which may be claimed to have been incurred through the 
use or sale of the equipment, including any possible failure of malfunction of the equipment, or part 
thereof. 

 

12.  The Warrantor assumes no liability for incidental or consequential damages of any kind. 

 

 
 

VTC305 Series 

Voltage Converter 

 
 
 
 
 
 
 
 
 
 

Installation & Operation Manual 

 

Samlex America Inc. 

110-17 Fawcett Road 

Coquitlam BC V3K6V2 

1-800-561-5885 / 604-525-3836 

www.samlexamerica.com

Summary of Contents for VTC305-12-12










Reviews: