www.larius.com
14
For disposing of the washing liquid, see the re-
quirements laid down in the Standards in force in
the country in which the equipment is used and
act accordingly.
The Client is solely responsible for any irregular
action taken before, during, or after disposing of
washing liquid, or in interpreting and applying the
current Standards in this regard.
J
I7
I8
Produit
J1
zEus for sanitation
REV
. 01 - 05/2020 - Cod. 150125
Use a metal container (I7).
To avoid any risk of electric shock connect the
collection container to a surface that is earthed
(
e.g. concrete
) and not to surfaces that will insulate
the container from the earth.
Hold the spray gun against the edge of the metal
contained (I7).
MAKE SURE THE PRODUCT IS SUITABLE TO BE
USED WITH AN AIRLESS SPRAY GUN.
PREPARING THE PRODUCT
• Mix and filter the product before using it.
Make sure the product to be used is compatible
with the materials employed for manufacturing
the equipment (
stainless steel and aluminium
).
Because of that, please contact the supplier
of the product.
• Point the spray gun into the collection container (
I7
) and
hold the trigger down (
in order to expel the oil contained
)
until clean liquid flows out.
Now, release the trigger.
• Remove the suction hose and remove the bucket of cleaning
liquid.
• Now point the spray gun (
I8
) into the container (
I7
) and press
the trigger to recover any cleaning liquid left.
• As the pump idles, press the “
OFF”
(0)
switch (
I5
) to stop
the tooling.
When this is complete, release the trigger.
Never use products containing halogen hydrocarbons (
as
methylene chloride
). If these products come into contact with
aluminium parts of the equipment, can provoke dangerous
chemical reactions with risk of explosion.
START OF THE WORKING OPERATIONS
• Use the tooling after performing all the
SETTING UP
ope-
rations above described.
• Dip the dip tube (
J1
) into the product tank.
• Place a bucket under the recirculation tube.
WORKING
Make sure that the electrical system is earthed
and complies with regulations.
Make sure that the earth clamp is positioned
correctly to ensure a safe earth on the pump unit.