www.larius.com
11
REV.
1 - 06/2020 - Cod. 150142
• Open the re-circulation tap (
I7
).
• Turn the unit ON-OFF switch (
I3
) on the
"ON" position (I)
.
• Rotate the pressure setting knob (
I4
) slightly clockwise so
that the machine operates at minimum power.
• Point the gun at a container (
I8
) keeping the trigger pressed
(
so as to drain the oil inside
) till a clean liquid comes out.
Now, release the trigger.
• Empty the tank.
• Point the gun at this point into a bucket and press the trigger
to empty the pump.
• As soon as the pump starts to run idle, turn the switch (
I3
)
to
OFF (0)
to switch off the device.
• Now the machine is ready.
• Insert the gun trigger lock and assemble the nozzle.
ON
OFF
I7
I3
Fig. 7I
Fig. 8I
Fig. 9I
I8
Fig. 10I
I3
Fig. 11I
I4
Aperto
Miro' for sanitation
