-
+
SPEED
www.larius.com
17
GIOTTO LINER PLUS
ED. 03 - 08/2020 - Cod. 150160
I2
I3
A
B
I4
I5
I7 (GEAR)
BACK
FORWARD
I6
I8
•
Press the button (
I2
) located on the control panel.
•
If operation is required upon a long rectilinear section,
the lever (
I3
) must be placed in its
“B”
position. A spring-
action mechanical stopper will automatically block the front
wheel (
I4
) in its straight position, thereby ensuring a straight
trajectory for the operator.
A = Connected block
B = Disconnected block
•
Use the appropriate handle (
I5
) on the control panel to adjust
the machine’s advancement speed.
•
Use the appropriate switch (
I6
) to select the direction
(FORWARD/REVERSE).
Press the
“GEAR”
button (
I7
) to initiate the movement of
the machine.
•
Hold down the lever (
I8
) on the left side of the control panel
while the machine is in motion.
NEVER point the spray gun at yourselves or at
other people.
The contact with the casting can use serious
injuries. In case of injuries caused by the gun
casting, seek immediate medical advice specifying
the type of the product injected.
SPRAY ADJUSTMENT
• Slowly turn clockwise the pressure control knob to reach
the pressure value in order to ensure a good atomization of
the product.
• An irregular and marked spray on the sides indicates a low
working pressure. On the contrary, a too high pressure
causes a high fog
(“overspray”)
and waste of product.
• In order to avoid overthickness of paint, let the gun advance
sideways when spraying.
• Always paint with regular parallel bands coats
(manual gun).
• Keep a safety and constant distance between the gun
and the support to be painted and also keep yourselves
perpendicular to it.
When finished using the equipment, follow the
decompression and cleaning procedures indicated
in the manual and return the levers to their original
positions.
