www.larius.com
11
J
I6
J1
J2
J3
GHIBLI 30:1 for sanItatIon
REV
. 01 - 04/2020 - Cod. 150112
• Lift the tank’s suction tube (
I3
).
• Lean the spray gun against the rim of the container
(I6
) a
nd
drain the residual oil pressing the trigger. Release the trigger
as soon as the clean liquid comes out.
• As an accelerated working of the pump (
the pump "idles"
)
appears, close the air passage valve.
PREPARATION OF THE SANITATION LIQUID
• Make sure the product is suitable to be used with a spray
gun.
Make sure the product to be used is compatible
with the materials employed for manufacturing
the equipment. For this reason, please contact
the supplier of the product.
•
Use the tooling after performing all the SETTING UP
operations above described
• Use the supplied lubricant (
J1
) supplied (
rif. 16325
) o facilitate
the sliding of the piston inside the seal packing and to
interpose the oil within the air.
WORKING
Check all the fittings for connection of the diffe-
rent components
(pump, flexible hose, spray gun, etc.)
before using the equipment.
At the start of each working day, make sure that
the ring nut is filled with hydraulic oil (ref. 16325);
the oil facilitates the sliding of the piston and
prevents any material which may have leaked
out of the seals from drying once the equipment
has been shut off.
• Fix the atomization nozzle (
J2
) on the spray gun (
J3
).