www.larius.com
17
DRAGON
ED.
14 - 10/2020 - Cod. 150178
Make sure that the electrical system is earthed
and complies with regulations.
Fig. 1J
Fig. 2J
Fig. 3J
CLEANING AT THE END
OF THE WORK
CLEANING FOR SOLVENT-BASED PRODUCTS
• Reduce pressure to the minimum
(turn counterclockwise the
pressure control knob
(
J1
)
)
.
• Press the switch
(
J2
) “
OFF
(0)”
placed on the box of the
electric motor, to stop the equipment.
• Hold the spray gun trigger down.
• Open the recirculation - safety valve (J3) to release the
pressure in the circuit.
• Lift the suction hose and replace the bucket containing the
product with a bucket of cleaning liquid
(make sure it is
compatible with the product you are using)
.
• Unscrew the nozzle on the spray gun
(remember to clean it
with cleaning liquid)
.
• Press the switch
(
J2
) “
ON”
(I)
of the equipment.
J1
OFF
ON
Aperto
J3
J2
J2
J