www.larius.com
28
DRAGON LINER 4600
ED.03 - 07/2021 - Cod. 150198
Fig. 3O
Fig. 4O
Fig. 5O
Fig. 6O
O4
O5
O6
O7
O3
O3
• Open the re-circulate safety valve (
O3
) to release the pressure
in the circuit.
• Eliminate any paint which remains in the tank (
O4
) by placing
the recirculation tube (
O5
) into a container.
• Turn the pressure adjustment
(
O1
) handle slightly clockwise
to make the machine function at minimum pressure
(pump
activated)
.
• Empty the tank (
O4
).
• Turn the pressure adjustment
(
O1
) handle to minimum
(pump
stopped)
.
• Insert wash fluid into the tank.
•
Clean the walls of the tank with a brush.
• Turn the pressure adjustment
(
O1
) handle slightly clockwise
to make the machine function at minimum pressure
(pump
activated)
.
• Make sure the re-circulation tube is inserted into a container
and wait for clean wash fluid to come out of it
(clean)
.
• Turn the pressure adjustment
(
O1
) handle to minimum
(pump
stopped)
.
• Close the re-circulation valve
(
O3
).
• Reposition the re-circulation tube within the tank.
• Remove the nozzles from the guns and wash them separately.
• Turn the pressure adjustment
(
O1
) handle slightly clockwise
to make the machine function at minimum pressure
(pump
activated)
.
•
Point the two manual guns (
O6
) into a container (
O7
), drain
the residual paint and wait for the wash fluid to come out
clean.