17
- 17 -
ES
COUNTERTOP INSTALLATION
Remove all packing material and accessories.
Examine the oven for any damage such as dents or
broken door. Do not install if oven is damaged.
Cabinet: Remove any protective film found on the
microwave oven cabinet surface.
INSTALLATION
1. Select a level surface that provide enough open space for the intake
and/or outlet vents (Figure1).
A 10-cm spacing should be kept between the appliance and right and
back walls, and a 30-cm spacing kept on the top. Never dismantle the
appliance’s feet, nor block the air intake and exhaust opening. The
left side must be open.
1) Blocking the intake and/or outlet openings can damage the oven.
2) Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to your
radio or TV reception.
3) Plug your oven into a standard household outlet. Be sure the
voltage and the frequency is the same as the voltage and the
frequency on the rating label.
4) Warning: The plug socket, electric appliances or the appliance
which are liable effected by heat and moisture should be kept
away from any vents on the oven.
2. The appliance can be installed with a degree of overlap (Figure2).
The maximum overlap height is two layers.
(A) loosening screw, Taking off installation board, then replacing
screw in its place tightly.
(B) taking off four screws as shown in the picture.
(C) putting installation board to the following location then fixing
screw just taking off tightly
Fig 1
OPEN
4.0 inch (10cm)
4.0 inch (10cm)
12 inch (30cm)
EN
Fig 2
