background image

 

      Powersine Combi

 

26 

 

8. WARRANTY CONDITIONS 

 

 
Samlex Europe (SAMLEX) warrants this product to be free from defects in workmanship or 
materials for 24 months from the date of purchase. During this period SAMLEX will repair 
the defective product free of charge. SAMLEX is not responsible for any costs of the 
transport of this product. 
 
This warranty is void if the product has suffered any physical damage or alteration, either 
internally or externally, and does not cover damage arising from improper use , or from 
use in an unsuitable environment. 
 
This warranty will not apply where the product has been misused, neglected, improperly 
installed or repaired by anyone other than SAMLEX. SAMLEX is not responsible for any loss, 
damage or costs arising from improper use, use in an unsuitable environment, improper 
installing of the product and product malfunctioning. 
 
Since SAMLEX cannot control the use and installation (according to local regulations) of their 
products, the customer is always responsible for the actual use of these products. SAMLEX 
products are not designed for use as cricital components in life support devices or 
systems, that can potentially harm humans and/or the environment. The customer is 
always responsible when implementing SAMLEX products in these kind of applications. 
SAMLEX does not accept any responsibility for any violation of patents or other rights of 
third parties, resulting from the use of the SAMLEX product. SAMLEX keeps the right to 
change product specifications without previous notice. 
 
Examples of improper use are : 
- Too high AC input voltage applied 
- Reverse connection of battery polarity 
- Connecting wrong batteries (too high battery voltages) 
- Mechanical stressed enclosure or internals due to harsh handling or incorrect packaging 
- Contact with any liquids or oxidation caused by condensation 
 

 

Summary of Contents for PSC1600-12-60





























Reviews: