Heat Wrap
14
Do not place wet or humid objects on the equipment.
Do not use this equipment in the open air.
Do not use this equipment in any place where inflammable products such as petrol, dissolvent, paint or
other inflammable liquids are stored.
Do not insert nor allow any object into the ventilation opening of the control unit as it may cause an
electric shock, fire or harm the unit.
Do not use this equipment with a damaged cable, plug it into a damaged socket, after it has malfunctioned,
has fallen or is damaged in any way. Take the unit to an authorised repair centre for revision, repair or
adjustment.
Do not place the cable under rugs, carpets or similar covers. Try to place cables away from areas where
someone is likely to stumble.
Do not squeeze nor bend the cable nor use it if harmed.
This device has an overheating protection system that will turn off the heating units in case of overheating
or abnormal conditions. If this happens, turn off the device, disconnect it and let it cool down for a few
minutes. After you have done this, you can reconnect it and start using it again.
Do not try to open or repair this equipment yourself. By doing so, it could cause you personal harm or
damage.
When you finish each treatment, turn off the unit and disconnect the cables. Wait for about 10-15 minutes
before you open the enclosure to remove treated objects. Never let heating panels touch your skin
immediately after treatments.
