background image

User Manual 

10 

 

 
 

MANUAL ECOWOOD 2.0 EN.DOCX   03/10/2022 

 

 

Low 

 

Medium 

 

High 

 

 

Selection treatment duration 

Use the "+" and "

" buttons to increase or decrease the desired treatment duration in minutes and 

seconds. When treatment has started, the timer starts a countdown to indicate the remaining time. 

 

Start and stop treatment 

Press the green button to start the treatment with selected parameters. When treatment starts, the 
button will turn red and you can press it to stop treatment if necessary. 

 

Progress indicator 

At the bottom of the screen is a progress bar indicating the evolution in percentage of the ongoing 
treatment. 

If at any time it is necessary to stop the treatment, you can press the red stop button or press the 
emergency stop button as well. 

The equipment will not generate any type of microwave radiation if the remote control is not properly 
connected. Accidental disconnection of the remote control will instantly stop any treatment. 

 

Pre-treatment required checks 

Inspect thoroughly and confirm that all objects are safe and suitable for treatment. Check objects and 
identify any existing damage to properly inform the customer beforehand. It is recommended to take 
photographs as proof of existing damage before treatment. 

Be careful with coatings such as varnishes and paints as elevated temperatures could damage or alter 
them. Microwave radiation produces very rapid heating that could be harmful to some materials. 

Avoid radiating large metal objects such as structures, coatings or metal plates, both inside the wood 
and in the area behind the treated area. In general, nails, screws and small metal elements are not a 
problem, but it is recommended to have them properly located and pay special attention if sparks or 
clicks occur during treatment. When in doubt, avoid treating sensitive areas or areas with the presence 
of metals. 

Avoid  the  presence  of  people  and  animals  in  an  area  of  12m  around  the  main  unit  during  any 
treatment. If the treatment is to be carried out on a wall, floor or ceiling with neighbours on the other 

Summary of Contents for EcoWood















Reviews: