Index revision : H
26
6336
6.9. Screen “E”
This is used to adjust the screen.
[
[
1
1
]
]
: Screen contrast can be modified in
this area. Pressing the buttons
corresponds to:
Reducing contrast, the screen
becomes increasingly brighter.
Increasing contrast; the screen
becomes increasingly darker.
[
[
3
3
]
]
: This button enables
switching to the following
menu or positioning on the
cleaning screen by pressing
the button for more than two
seconds.
Pressing the button validates the parameters
and the operator has access to the next
menu, “F” or “G” with a PLC.
If no action is taken, the display
switches automatically to screen “A” after
one minute.
Immediate return to screen “A” if the trigger is
pressed.
[
[
2
2
]
]
: This button
reverses the screen colour.
Pressing this button reverses the
display in a loop:
- Either the graphics are orange on a black back-
ground.
- Or the graphics are black on an orange back-
ground.
1
1
3
3
2
2
E
or
