Use of the product
32
9.2
Safety in production
Guards (motor cover, coupling guard, housings, ...) are set
up for safe use of the equipment.
The manufacturer can not be held responsible in case of
bodily injury as well as breakdowns and / or damage of the
material resulting from the destruction, the occultation or
the total or partial removal of the protectors.
9.3
Start up
Pumps are tested for operation at the factory using a light weight oil
lubricant.
Before starting up, you must flush the pump with the appropriate solvent.
At the end of the working day, carry out a flushing with the appropriate
solvent. We advice you to stop the fluid section in the "low position" to
prevent material spreading on the piston rod.
