SAMES KREMLIN
Page 4
Manual : 573.187.112
COMPLETE BALL VALVE PLUNGER ASSEMBLY (MP 200) REPLACEMENT
Unscrew trigger pad guide (18).
Holding trigger adjustment nut (16) with wrench, loosen and remove lock nut (17), adjustment nut
(16) and trigger pad (15).
Unscrew valve seat (4) and remove valve plunger (6) from the gun : be sure that O-Ring (in the
back) is also removed when the valve plunger assembly is removed.
Replace ball valve plunger assembly (6) and valve seat (4) with new one.
Install trigger pad (15), with recess end facing to the rear and install parts (16 and 17).
Hold trigger lightly while threading adjustment nut (16) forward. As nut tightened, permit trigger to
move up until it makes firm contact with the safety lock-off part.
Hold nut (16) in position with wrench, then tighten lock nut (17) with a second wrench. Replace
trigger pad guide (18) and tighten.
HANDLE FILTER (MP 200) REPLACEMENT
Unscrew filter enclosure (19), remove gasket (5) and handle filter (7) to change it.
After service work on gun always engage trigger lock-off and follow pump safety
instructions for starting pump. Release the lock after inspection of eventual leaks of the
complete system under pressure.
5. CLEANING
Change material with solvent and spray until the fluid is not colored with material.
Remove base and tip to clean them with a brush (no metallic parts) and solvent. Insist particularly on
threads.
Do not keep the dipping in solvent.
6. FIXING AND TIGHTNESS OF AIRLESS ® TIP
Fixing of reversing tip on the gun is ensured by the base (P.N° 922.562.000). Tightness is
ensured by the tip gasket (P.N° 922.004.018 by 8).
Fixing of flat tip on the gun is ensured by the base (P.N° 922.004.202). Tightness is ensured by
the tip gasket (P.N° 922.004.018 by 8).
7. AIRLESS ® REVERSING TIPS
Flow low
viscosity at
140 bar
(l/mm)
Equiv
Ø
(mm)
Recommen
ded gun
filter (mesh)
Spray angle
P.N° : 922.055.xxx
(replace the crosses with the 3 figures -
Eg. Tip 517 – P.N°. 922.055.517)
30° 40° 50° 60° 90°
Fan width (mm) at 30 cm
15-20 20-25 25-30 30-35 45-50
KIND OF MATERIAL
0,454 l/mn
0,643 l/mn
0,870 l/mn
1,136 l/mn
1,360 l/mn
1,741 l/mn
2,50 l/mn
3,33 l/mn
0,28
0,33
0,38
0,43
0,48
0,53
0,63
0,74
red (150)
red (150)
yellow (100)
yellow (100)
white (50)
white (50)
white (50)
white (50)
311
313
315
317
411
413
415
417
419
421
513
515
517
519
521
525
529
613
615
617
619
621
925
929
Lacquers
Varnishes
Primers
Solvent-based materials
Acrylic
Vinylic, medium pasty waterproofing products
Medium pasty, front
Large flow, pasty
