Index revision : A
16
7145
5.2. Screen 1: Operating Modes Screen
This screen is used to enter the various operating setvalues in the operating modes:
5.2.1. Choice of presets
To select the different icons, press the key
The voltage and current values of the first 3 modes are preset, the setting is locked.
.
In the custom mode, the voltage and current values can be adjusted using the
and
keys below the value to be changed.
The injection and dilution parameters can be adjusted for each type of part using the corres-
ponding
and
keys
.
WARNING : When spraying is in operation with voltage at the output,
the symbol
flashes. The voltage and current settings can no longer be changed.
Area
Description
Area 1
Choice of presets, 4 modes are available
Area 2
Voltage setting ( available only in custom mode)
Area 3
Current setting ( available only in custom mode)
Area 4
Setting the injection air or powder flow rate
Area 5
Setting the dilution or transport air
Simple parts
Complex parts
Over-powder
coating parts
Custom mode
DES07381
30
95
kV
µ
A
%
%
0
0
1
INOGUN M
V : XXXX
1
2
3
4
5