Indice de révision : G
21
6102
5. List of parameters
(diagrams in this chapter to be taken only as guide lines)
Change in values of
parameters (Inc.) (2)
Change in values of
parameters (Dec.) (3)
Next screen or value
validation (4)
Last screen/special
function (5)
1
Same high voltage unit as last start up ?
no.
2
no.
3
yes.
4
After validation with key 4
, the param-
eters of this new high voltage unit are
automatically selected and all old adjust-
ments are lost. User must confirm new
type of high voltage unit.
5
Initial menu (high voltage unit mode is
displayed).
6
Voltage set point adjustment (kV).
7
Current II limitation adjustment (µA),
or current disjunction current
adjustment (µA).
8
Is there a storage fault?
9
Display of faults, scrolling by keys 2
and 3
, cancellation with key 5
.
10
Type of trigger: 0 = internal - 1 = external.
11
Request for calibrating menu.
12
Calibrating code entry.