Index revision : A
6
7145
1.2. Precautions for Use
This document contains information that all operators should be aware of and understand
before using the Inobox control module This information highlights situations that could result in
serious damage and indicates the precautions that should be taken to avoid them. .
WARNING : Before any use of the Inobox control module, check that all operators:
• have previously be trained by the compagny
SAMES KREMLIN
,
or by their distributors
registered by them for this purpose.
• have read and understood the user manual and all rules for installation and operation, as
laid out below.
It is the responsibility of the operators’ workshop manager to ensure these two points and it is
also his responsibility to make sure that all operators have read and understood the user
manuals for any peripheral electrical equipment present in the powdering area.
1.3. Warnings
WARNING : This equipment can be dangerous if not used in compliance with the safety regulations.
WARNING : It is the customer’s responsibility to verify which local fire and safety standards are
applicable for use of the Inobox.
WARNING : This equipment may be hazardous if it is not used, disassembled and reassembled
in accordance with the rules indicated in this manual and in any applicable European Standard
or national safety regulations.
• The Inobox control module must not be installed outdoors.
• The ambient temperature around the Inobox control module must be no greater than
40°C.
• The Inobox module must not be altered from its original condition.
• Only
SAMES KREMLIN
spare parts, or a repair performed by the
SAMES KREMLIN
repair department, are able to ensure and guarantee the operational safety of the
Inobox module.
• Turn off the electrical power supply to the Inobox module before disconnecting the
connectors from the module.
• Any repairs on the Inocontroller module with the power supply still on can only be perfor-
med by personnel certified and trained for electrical repairs.
