Samcon RoughCam IPM2036, User Manual

Page: 15 / 28

Doc.-ID: 220815-PT10BA-ES-RoughCam IPM2036_en_rev.00.docx, Page 15 of 28
Figure 5-4 RoughCam IPM2036 T10-VA2.1.K1.BOR-L.HH-010.N- T
Video Tutorial:
Observe our video tutorial:
“SAMCON 01 Wiring the cable SKDP03-T to the junction box ExTB-3”
https://go.samcon.eu/v01
Figure 5-5 Video Tutorial ExTB-3
The pin assignment of the SKD01-T is executed in accordance with the standard
EIA/TIA-568B as follows:
Camera
(T568B)
Colour
SKD01-T
(IEC60757)
Terminal
Box Cross-
sectional
surface Comment
Tx+ WH / OG 1 0.32 mm 2 Solid conductor
Tx- OG 2 0.32 mm
2
Solid conductor
Rx+ WH / GN 3 0.32 mm 2 Solid conductor
Rx- GN 4 0.32 mm
2
Solid conductor
(PoE +48 VDC)
WH / BU 5 0.32 mm
2
Solid conductor
(PoE +48 VDC)
BU 6 0.32 mm 2 Solid conductor
(PoE GND)
WH / BN 7 0.32 mm
2
Solid conductor
(PoE GND)
BN 8 0.32 mm 2 Solid conductor
GND/SHD YE / GN PE 2.5 mm
2
Flex
Table 5-2. Wire assignment of terminal box ExTB-2