Samcon ExCam Series T08, Installation Manual, Page: 26 / 52

Doc.-ID: 140721-PT08BAU-SS-Ex Installation Manual rev.03 (1st Supplement), page 26 of 52
8 Maintenance/ Modification
The applicable regulations for the maintenance and servicing of electrical devices
in potentially explosive atmospheres must be followed.
The necessary maintenance intervals depend on the operating condition and have to be
individually determined by the user. Especially parts on which the type of protection de-
pends are to be examined as part of the maintenance (e.g. sound condition of the casing,
the seals and the cable entry points). Repair works should be carried out when the need
for them is recognised during maintenance.
9 Reparation
Reparations must only be carried out with original parts of SAMCON Prozessleittechnik
GmbH. Damaged pressure-resistant casing should be replaced completely. In case of
doubt, send the part in question back to SAMCON Prozessleittechnik GmbH.
Reparations concerning the explosion protection must only be carried out in accordance
with nationally applied regulations by SAMCON Prozessleittechnik GmbH or a qualified
electrical technician authorised by SAMCON Prozessleittechnik GmbH.
Rebuilding of or alterations to the devices are not permitted.
10 Disposal/ Recycling
When disposing of the device, nationally applicable regulations must be observed.
This Document is subject to alterations and additions.