manualshive.com logo in svg

Sambo SB-V Series, Operating Instructions Manual, Page: 17 / 18

Share
Download
Sambo SB-V Series Operating Instructions Manual Download Page 17

Operating instructions for SAMBO Bevel

V1.00-2021.03.22

Reassembly Instructions

Refer to Figure 8

1. Install the Spur Gear Housing (item no. 1) on the bevel gearbox, ensuring proper gasket is installed

between the gearbox and spur gear housing

2. Install the Helical Gear (item no. 2) on the gearbox Bevel Pinion with Keys (item no. 3). Fasten with

Retaining Ring (item no. 4).

3. Insert the Bushing (item no. 10) into the end of the Input Shaft/Pinion (item no. 9).

4. Install the Ball Bearings (item no. 11) and Retaining Ring (item no. 4) onto the Input Shaft/Pinion (item

no. 9).

5. Install the Input Shaft/Pinion subassembly in the Cover (item no. 12) using Retaining Ring (item no. 16).

6. Install the Ball Bearing (item no. 6) in the Spur Gear Housing (item no. 1).

7. Assemble the Helical Gear (item no. 2) on the 2nd Set Pinion (item no. 5) with Keys (item no. 7). Fasten

with Retaining Ring (item no. 4).

8. Install the Ball Bearing (item no. 8) on the 2nd Set Pinion (item no. 5).

9. Install the Helical Gear/2nd Set Pinion subassembly in the Ball Bearing (item no. 6).

NOTE:

Lubricate the Spur Gearing.

10. Replace the Gasket Cover (item no. 13).

11. Install the Cover (item no. 12) with Input Shaft/Pinion subassembly onto the Spur Gear Housing (item no.

1), ensuring proper mesh of Input Shaft/Pin- ion (item no. 9) and Helical Gear (item no. 2), and alignment
of Ball Bearing (item no. 8) with Cover (item no. 12).

12. Replace the Oil Seal (item no. 15) in the Cover (item no. 12).

13. Install the Input Flange (item no. 18) with Oil Seal (item no. 15) onto the Cover (item no. 12) using Cap

Screws (item no. 19).

NOTE:

Replace any worn or damaged O-Rings or Gaskets to ensure proper sealing and operation.

17

Summary of Contents for SB-V Series



















Reviews:

No comments