Operator's manual
Self-loading gritter
Sahara
- 7 -
4.
EQUIPMENT AND SPARE PARTS
4.1.
Standard equipment
warranty card,
operator's manual with spare part list,
lowering cylinder,
lighting,
tarpaulin,
spray paint (150 ml).
4.2.
Spare parts
Spare parts should be ordered according to spare part catalogue by giving full name of the
part as well as its catalogue no.
NOTE!
Use only genuine SaMASZ fittings and spare parts. Spare parts of unknown
origin or new made feature lower strength and have unfavorable influence on
machine’s performance and overall safety.
NOTE!
The SaMASZ co. does not bear any responsibility for damages and defects
caused as a result of applying non-genuine parts and fittings.
5.
OPERATING GRITTER
NOTE!
Materials (sand, gravel, salt) used to spreading must be dry, stored under roof
and protected against dampness. Natural aggregate should be homogenous.
5.1.
Mounting gritter to tractor
Conditions of mounting gritter to tractor
Sahara gritter has been designed as rear gritter mounted on rear 3-point linkage Cat. II (3-point
linkage Cat. II).
The tractor has to be equipped with at least two pairs of hydraulic outlets.
The tractor has to be equipped with 7-pin power connector 12V (lighting connector).
Gritter may be mounted in two positions (
Fig.
6
). Whereas a) position is recommended owing
to easy manner of mounting to tractor.
Fig. 6.
Gritter aggregation: a) from lying position, b) from standing position, c) operating and transport
position,
▄
– protective pads
a)
b)
c)
▄
▄
90°
