Operator’s manual
Rotary tedder
P4-420
,
P4-471
and
P4-531
Rotary tedder
P6-651
and
P6-771
Rotary tedder
P8-790
and
P8-890
- 26 -
In order to prepare the machine for operation, perform the following:
carefully (either manually or by means of loader) lower vertically positioned extreme most
rotors,
unlock pawls and eject cylinders,
remount previously dismounted pin
A
as provided in
Fig. 19
,
lift the tedder by means of hydraulic cylinders.
Fig. 19
.
Mounted cylinder lever
WARNING!
Switching tedder from compact position for transport to working position
without having mounted the pin shall lead to damaging cylinder and cylinder
lever, which is therefore, not covered by warranty.
5.7.
Preparing the tedder for work
NOTICE:
During storing of the machines in company SaMASZ the cylinders are protected by special
grease in order to secure them against weather which may cause their premature wear.
Before starting the operation excess grease should be removed from the cylinders.
Fig. 20.
Rotary tedder in working position
At the workplace and after setting the tedder, in the operating position must be:
mount the PTO shaft tip on the PTO of the tractor (if only one tip has been removed) or install
the entire PTO shaft,
A
B