Operator’s manual
Double-sided mower with central
suspension
“REWERS”
- 42 -
CAUTION:
The above instructions should be strictly followed. If the discs in
the cutterbar rotate loosely, do not worry about high intersecting axis gear
temperature; after long working time it may reach even 100
o
C.
7.4.
Lubrication points
Every 50 hours of the mower's operation, lubricate its joints (
Fig. 40
) using
STP
grease.
Bearings (
Fig. 41
) on the mower should be lubricated using
ŁT43
grease (or other equivalent
lubricant for rolling and sliding bearings which operate in temperature range of -30
o
C and +130
o
C.
Fig. 40.
Lubrication points to be lubricated with STP grease
Fig. 41.
Point of lubrication with ŁT43 grease for non-locating bearing on conditioner shaft
Lubrication
points
Lubrication
points
Lubrication
point