11
OPERATOR'S MANUAL
HYDRAULIC FRONT-LOADER EXTENSION
ARM
FISHER
4.3.
Residual risk
Despite the fact that the manufacturer of the machines has taken great care in the design and
manufacturing of the machines, certain risks during machine operation and maintenance are
unavoidable.
Major source of risk follows performance of these operations:
❑
operation by individuals who have not read the operator's manual and safety labels,
❑
operation by persons under influence of alcohol or other substances,
❑
not being cautious during transportation and moving the machine during operation,
❑
presence of persons and animals within the machine operation range,
❑
performing servicing and machine adjustments with the engine on.
1.
Danger of machine entanglement
This risk occurs when (
1
) changing position of the machine, (
2
) operating near rotating parts, and
(
3
) working without safety guards.
During operation, maintenance and adjustment, always wear protective gloves, shoes and
clothing without loose elements, belts, etc. Always respect warnings on safety labels attached to the
machine.
2.
Danger of cutting injury
This risk is present when replacing working parts with sharp edges. During any maintenance and
repair works, always wear safety gloves.
3.
Danger of injury from liquid ejection out of hydraulic system
When connecting hydraulic hoses to and from both the vehicle
’
s and the tooling carrier's
hydraulic connectors, make sure that there is no pressure in both the vehicle
’
s and the machine
’
s
hydraulic system.
When operating the hydraulics, always wear protective glasses and gloves. Regularly check
hydraulic hoses for leaks.
WARNING!
Residual risk results from the machine operator's fault.
4.
Forbidden actions
During machine
’
s operation, do not do the following:
❑
never unblock the machine, make any regulations or repairs of the machine while it is in motion,
❑
never change order of operation and maintenance activities described in operator
’
s manual,
❑
never operate the machine when it is not in working order or has damaged safety guards,
❑
never get your hands and legs close to rotating parts of the machine,
❑
during repair and maintenance of the machine, always comply with descriptions included in
operator
’
s manual; always do these activities when the vehicle
’
s drive is off,
❑
before any works, focus your attention solely on the tasks to do,
